Flaw Detector Fruit Hardness tester Rockwell hardness tester Force gauge Thickness gauge
Notice
welcome to Beijing Lanetech Instruments Co., Ltd.
Download
✤ Home > Products > Portable Rockwell Hardness Testers > Superficial hardness Rockness Tester　PHR-1S/2S Details
Superficial hardness Rockness Tester　PHR-1S/2S

[Specifications]:
Superficial hardness Rockness Tester;
Comply to standard ISO6508;
Be used on the desk as well as on site;
[Superficial hardness Rockness Tester　PHR-1S/2S Product details]:
Tests the superficial hardness of metals.
The test principle and accuracy comply to standard ISO6508.
With the bench stand it can be used on the desk as well as on site.
Tests the hardness of thin plate, slim pipe, thin shaft, small ball and small stampings, workpieces with small supporting surface as well as parts requiring small indentation, replacing Vickers hardness tester.
It is used for finished workpiece NDT test directly. The small  indentation is non-destructive to most workpieces.
Traceable standard hardness block.
Indenter inspected with standard Rockwell hardness tester.
Test force calibrated with load cells directly traceable to national secondary benchmark.
 

Main Technical Parameters
Initial Test Force:                  3kg
Total Test Force:                    15kg, 30kg, 45kg
Force Applying Method:          By screw
Indenter:                                120°diamond cone ,Ф1.588mm carbide ball
Accuracy:                               Meets the requirements of ISO6508
Resolution:                            0.5HR
Testing Range:                       HRN, HRT,HRW, HRX, HRY, etc. 15 scales.
Application:                            All metals including iron, steel copper, aluminium, zinc, lead, tin,   carburized steel, nitrided steel etc.
 


Application
Tests thin shaft ＞Ф2mm with V anvil.
 Tests small ball ＞Ф2.5mm with ball testing anvil.
 Tests small and irregular stampings with small supporting surface using slim raised spot anvil.
Tests tin plate and cold-rolled sheet using PHR-1S and diamond raised spot anvil.
Tests carburized layer or nitrided layer on large workpieces using PHR-100S.
 
Standard Package 
Tester
Bench stand
120°diamond cone indenter
Ф1.588mm carbide ball indenter
Superficial Rockwell test blocks
V anvil
Flat anvil
Extension
Carrying case


 
Optional Accessories
120°diamond cone indenter
Ф1.588mm, Ф3.175mm carbide ball indenter
Ф1.588mm, Ф6.35mm, Ф12.7mm steel ball indenter
Standard test blocks (HR15N, HR30N,HR45N, HR15T, HR30T, HR45T)
Raised spot anvil
Slim raised spot anvil (flat top: Ф1.5mm, Ф2.5mm, Ф3.5mm)
Diamond raised spot anvil
Ball testing anvil
Spare magnifier


Model Selection

   
Model Specimen/Opening Size
(W×D)
(mm×mm)		 Net Weight
(kg)		 Gross Weight
(kg)		 Package Dimensions
(mm×mm×mm)
Tester Bench
stand		 Tester Bench
stand		 Tester Bench
stand
PHR-1S 25×25 0.8 1.5 2.6 1.8 330×255×150  
 
232×215×148
PHR-2S 50×50 1.1 1.5 3.6 1.8 390×280×160
PHR-4-2S 100×50 1.5 4.5 5.0 4.9 510×375×177
                              
 
Force Gauge Flaw Detector Webster Hardness tester Glossmeter Fruit Hardness Tester Thickness Gauge Force Gauge Hardness tester
Beijing Lanetech Instruments Co., Ltd. Copyright 2008-2019 All Rights Reserved
Adress：1602 Lingdi,Beiyuan Lu, Chaoyang District,100012 Beijing
E-mail：sales@lanetechworld.com angelajade@126.com
Tel：+86-10-84956391
Hot-Line：+86-10-84956391